HP LaserJet 1006 Drivers

Monday, September 10th, 2018 - HP LaserJet

HP LaserJet 1006 Drivers Download. The LaserJet P1006 is one of the smallest desktop printers around, measuring just 194x347x305mm, although it takes up a little more space with its paper tray extended. Like most personal mono lasers, it’s not designed for particularly heavy use, with a maximum monthly duty cycle of 5,000 pages, which usually translates to recommended use of between 500 and 2,000 pages monthly. This is quite a bit lower than the quoted maximum duty cycles for most mono laser devices.

Typically for a budget device, it has only a USB connection. Driver installation is simple and the setup CD even includes an animated guide to unpacking and connecting your printer. It gets a little muddled towards the end, as you have to allow Windows’ own hardware detection wizard to perform the final step of locating the drivers, but the process went smoothly.

HP LaserJet 1006 Drivers

The output tray is just a plastic flap that folds out from the top of the printer. Although it does a fair job of containing piles of printed pages, the first page is usually pushed off by those that follow it. This is more down to poor design than the sheer speed of the device, as the P1006 is rather slower than most similarly priced mono laser printers. It managed just 15.8ppm in our mono text print test, and 15ppm when we printed a set of illustrated business documents.

HP Printer Support for HP LaserJet 1006 Drivers

Mono text is sharp, dark and as perfect as we’ve come to expect from HP’s laser devices. By default, the P1006 uses its FastRes 600 mode, with a resolution of 600x600dpi. A higher quality mode, FastRes 1200, is available using resolution enhancement to fill in difficult areas like fine curves and small fonts. We tried it during our photo printing tests, but found that it produced grainier images and, at 22 seconds, took longer to print two 10x8in photos on A4 than the default 600dpi mode, which printed them in just 17 seconds.

In terms of size, quality and ease of use, the P1006 is an excellent little printer, but it’s not good enough to justify its price – you can get similar results from a mono laser that costs half as much. Print costs are also ridiculously high at 3.3p per mono page. Between them, these costs give the P1006 a Total Cost of Ownership almost as high as that of a colour laser device. Three years’ light use – 100 pages a month – will cost you £211. Our medium use estimate, based on 750 pages a month for a total of 21,000 pages over three years, is a whopping £823. At least its low-maintenance: there’s just one consumable, the £51 CB435A cartridge with an integrated photoconductor drum and enough toner for around 1,500 pages.

If you can find the P1006 at a lower price, or if you could arrange a supply of inexpensive toner cartridges, then it would be a good buy. As this isn’t currently the case and there are better value printers available.


Operating System Support for HP LaserJet 1006 Drivers

  • Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP and Windows Server
  • Mac OS 10.13, Mac OS 10.12, Mac OS 10.11, Mac OS 10.10, Mac OS 10.9, Mac OS 10.8, Mac OS 10.7, Mac OS 10.6, Mac OS 10.5, Mac OS 10.4, Mac OS 10.3.

HP LaserJet 1006 Manual

For manual HP printers and printer hp user guides you can download the link provided below.

HP LaserJet 1006 Troubleshooting Manual

You can download the hp printer troubleshooting and hp service at the link provided below. You can also contact the mobile support center for hp service center if you experience problems with your printer.


HP LaserJet 1006 Toner :

The following table displays HP LaserJet 1006 Toner Cartridge information :

Country / RegionToner Cartridge Name
The AmericasHP 15A Black
EuropeHP LaserJet C7115A Black Print Cartridge
Middle East and AfricaHP LaserJet C7115A Black Print Cartridge
Asia PacificHP LaserJet C7115A Black Print Cartridge

Other Driver: HP LaserJet 100 Color MFP M175nw Driver


HP LaserJet 1006 Drivers Installation for Windows

First Method

Install the HP printer setup with a software CD. (Automatic Wizard)

Requirements for the first way:
Prepare one CD / DVD Drive installed on your computer.
The CD / Disk driver software from the HP printer setup is already there when purchasing the printer.
Also, prepare a USB cable from the printer.

Steps for installing the HP printer setup with the driver CD:

  1. Please turn on the computer then please prepare your HP printer setup or HP printer driver as above.
  2. Turn on the HP printer.
  3. Then keep unplugging the HP USB printer cable (Do not install it until the instructions).
  4. Next, please insert the HP printer CD driver disk into the CD / DVD drive on your computer, and run the CD setup wizard, and continue by following the instructions to install it.
  5. Now continue by connecting the HP printer to the USB cable to the computer, when the installer wizard asks (Note: Do not install before asking). The wizard will analyze when you connect it. After acknowledging the printer, it will automatically go into further steps. Note: Wait until printer detection is complete.
  6. Continue to follow the wizard’s instructions to complete it.
  7. After all, steps are complete, the installation process of your HP driver is complete and runs perfectly.

HP LaserJet 1006 Drivers Installation for Windows

Second Method

Install the HP Printer setup without CD. (Automatic Wizard)
Method 2 Requirements:

Please prepare Software/driver Setup files from your HP Printers. You can download the download table available on this page according to your Operating System.
also prepare a USB cable, which will connect the printer to the computer. That default is available on the printer.

Steps for installing HP printer driver setup with File Settings.

  1. Please turn on the computer then please prepare your HP printer setup or HP printer driver as above.
  2. Then Turn on your printer’s HP.
  3. Remember, unplug the HP USB printer cable (Do not install the instructions).
  4. Next, Take the HP printer driver setup file from the link or the printer driver download link on this page then run the download file and follow their instructions to install it.
  5. Then connect the HP printer to the USB cable to the computer, when the installer wizard asks (Note: Do not install before asking). The wizard will analyze when you connect it. After acknowledging the printer, it will automatically go into further steps. Note: Wait until printer detection is complete.
  6. Then please follow the wizard’s instructions to complete it.
  7. After all, steps are complete, the installation process of your HP driver is complete and runs perfectly. And finally, the printer is ready for use.

HP LaserJet 1006 Drivers Installation for Windows

Third Method

Install the HP Printer with the driver manually with the help of the “Add Printer” option (Windows built-in feature)
Method 3 Requirements:

Please prepare Software/driver Setup files from the HP printer. You can download the download table available on this page according to your Operating System.
then you prepare the USB cable, which will connect the printer to the computer. You can get it when you buy it for the first time.

Steps for installing the HP printer setup manually.

  1. Please turn on the computer then please prepare your HP printer setup or HP printer driver as above.
  2. And then turn on the HP printer.
  3. Then connect the USB HP printer cable from the Printer to the computer.
  4. Then extract the HP setup file, and their location is extracted (the default location is the TEMP folder)
  5. Click the START button -> then click on Control Panel -> then click on View Devices & Printer (for Windows 7, Vista user).
  6. Note: For XP Users Click Fax & Printer.
  7. Please click Add Printer.
  8. When it asks for the location driver, then provides a path, where the setup file has been extracted.
  9. Continue by following the wizard’s instructions to complete it.
  10. After all, steps are complete, the HP driver installation process of your printer is complete and runs perfectly. And finally, the printer is ready for use.

How to HP LaserJet 1006 Drivers Installation for Mac OS

  1. Downloading the printer driver on this page matches the operating system of your computer.
  2. Open the downloads folder and then click the HP Easy Start driver file or the .dmg driver file to install.
  3. Then follow the instructions and instructions on the screen to set up the printer connection and install the software.
  4. Then, select and click add printer to create a print queue on Mac.
  5. Add window opens.
  6. Click the name of your printer, click the use or print using menu, select the name of your printer in the pop-up menu, and then click add.
  7. Return to the stage of the HP installer to complete the installation.

How to Uninstall HP LaserJet 1006 Drivers

  • Open the control panel.
  • Then select the software that will be uninstalled.
  • Then click uninstall
  • Follow the uninstall process until it’s finished
  • Then click ok and finish.

HP LaserJet 1006 Drivers Download for Windows

Drivers & SoftwareSizeLinks
Driver Product Installation Software
HP LaserJet P1006 Printer Series Full Feature Software and Driver163.3 MB
HP LaserJet P1006 Hostbased Plug and Play Basic Driver3.9 MB
Utility Diagnostic Tools 
HP Print and Scan Doctor for Windows10.6 MB

HP LaserJet 1006 Drivers Download for Mac OS

Drivers & SoftwareSizeLinks
HP LaserJet P1006 Full Feature Software and Driver10.1 MB

HP LaserJet 1006 Drivers | HP Printers Driver | 4.5